Components held in rubber belt cavity formed between barrel head plates. The rotation of the barrel head plate causes the components to tumble. The high velocity abrasive from the top clean the components from all sides. Applications – forging / castings and Al die casting.
| TECHNICAL SPECIFICATIONS | |||||||
| Particulars | GLINT 20X27 | GLINT 24X29 | GLINT 27X36 | GLINT 36X38 | GLINT 42X60 | ||
| Cabin Size (mm) | 1080X890X1800 | 1130X990X1800 | 1400X1040X2000 | 1400X1350X2100 | 2000X1650X2400 | ||
| Mill Capacity (Cft) | 2 | 3 | 5 | 7 | 10 | ||
| Size of Barrel (mm) | Ø500 X 675 | Ø600X750 | Ø675 X 915 | Ø915 X 965 | Ø1100 X 1520 | ||
| Work Loading height (mm) | 1100 | 1150 | 1180 | 1200 | 1200 | ||
| No. of Blast Wheel | 1 No | 1 No | 1 No | 1 No | 2 Nos | ||
| Blast Wheel Size (mm) | Ø 305 | Ø 305 | Ø 380 | Ø 495 | Ø 305 | ||
| Blast Wheel HP | 5 HP | 7.5 HP | 10 HP | 15 HP | 10 HP | ||
| Mill Drive Motor HP | 1 HP | 1 HP | 2 HP | 2 HP | 3 HP | ||
| Bucket Elevator Motor HP | 1 HP | 1 HP | 2 HP | 2 HP | 2 HP | ||
| Loader Motor HP | -- | -- | 2 HP | 3 HP | - | ||
| Dust Collector Blower cap.(12"WG) | 1300 CFM | 1300 CFM | 1900 CFM | 1900 CFM | 2800 CFM | ||
| Dust Collector Motor HP | 5 HP | 5 HP | 7.5 HP | 7.5 HP | 10 HP | ||
| Shake Motor HP | 0.5 HP | 0.5 HP | 0.5 HP | 0.5 HP | 0.5 HP | ||
| Total Power Regd. (HP) | 12.5 | 15 | 24 | 31 | 35.5 | ||
| Electricals | All Motors shall be standard TEFC squinel age suitable for 415V, 3P4, 50 cycles AC supply | ||||||