Table type machines are ideally suited for foundries, forge shops, fabricated items and job workers with mix component size of small and large components. These machines are available in various swing table sizes of 30” / 36” / 48” / 72” / 96” and 96” with 120” swing. Single and double door options available.
| TECHNICAL SPECIFICATIONS | |||||||
| Particulars | GLINT T-30 | GLINT T-36 | GLINT T-48 | GLINT T-72 | GLINT T-96 | ||
| Cabin Size (mm) | 1250X1000X1800 | 1400X1140X1800 | 2150X1250X1800 | 3500X2000X2300 | 4000X2300X2400 | ||
| Load Capacity (Kgs) | 350 Kgs | 450 Kgs | 600 Kgs | 1500 Kgs | 4000 Kgs | ||
| Table size (mm) | Ø750 | Ø915 | Ø1220 | Ø1820 | Ø2450 | ||
| No. of Blast Wheel | 1 No | 1 No | 1 No | 1 Nos | 2 Nos | ||
| Blast Wheel Size (mm) | Ø 305 | Ø 305 | Ø 380 | Ø 495 | Ø 495 | ||
| Blast Wheel HP | 7.5 HP | 7.5 HP | 15 HP | 15 HP | 20 HP | ||
| Table Drive Motor HP | 1 HP | 1 HP | 1 HP | 1 HP | 1 HP | ||
| Bucket Elevator Motor HP | 2 HP | 2 HP | 2 HP | 2 HP | 3 HP | ||
| Screw Motor HP | 1 HP | 1 HP | 1 HP | 1 HP | 2 HP | ||
| Dust Collector Blower cap.(12"WG) | 1300 CFM | 1300 CFM | 1900 CFM | 2800 CFM | 4300 CFM | ||
| Dust Collector Motor HP | 5 HP | 5 HP | 7.5 HP | 10 HP | 15 HP | ||
| Shake Motor HP | 0.5 HP | 0.5 HP | 0.5 HP | 1 HP | 1 HP | ||
| Total Power Regd. (HP) | 16 | 16 | 27 | 30 | 62 | ||
| Electricals | All Motors shall be standard TEFC squinel age suitable for 415V, 3P4, 50 cycles AC supply | ||||||