Description :

This machine is used for the de scaling of carbon steel and stainless steel strips in after annealing. The machine is designed to suit the strip width from 200 mm to 1800 mm and line speeds of 1.5m/min. to 16m/min. surface is cleaned and then the strip is fed to cold rolling. The polluting process of pickling is avoided and the space required is much lower as compared to pickling.

Description :

This machine is used for the de scaling of plates and rolled section prior to fabrication. The component is conveyed on a roller conveyor and exposed to the blast stream from 4 / 6 blast wheels to clean it all over. These are normally custom built to suit the requirement. Similar machines are used for cleaning of chassis long members and cross members. Structural members like bridge girders and PEB columns and portal trusses can be blast cleaned in a similar machine. Ship building yards typically use these machines for plates and structures. Earth moving equipments components and wind mill structures are cleaned on roller conveyor type machines.

Description :

Primarily used as an online machine where component needs exposure from only one side only. As in case of brake shoe, where the purpose of blasting is primarily for creating an anchor pattern for the lining material and to remove the extra lining to prepare the surface for painting.

Description :

These machines consist of an conveyor to convey the cylinders in and out of the machine where in they are also rotated about the horizontal axis, a number of blast wheels depending on the production rate are mounted to achieve the cleaning from all the sides. Higher degrees of automation is offered for auto loading of the cylinders on the conveyors and automatic knock out from the conveyor using PLC control and Hydro pneumatic actuators.